How to remove an assembled rear axle quickly.

MESSAGE: (#94742) Back axle removed - thanks!

<http://www.model-t-ford.com/cgi-bin/webbbs/webbbs_config_512.pl?rev=94742>
AUTHOR: Mark Rand
DATE: 10/24/05 12:17

:clap
Thank you everybody for your help and advice re back axle/ drive shaft and
radius rods removal.
In the end I used a block and tackle suspended from a robust beam in the
garage roof. I removed the rear floorboards and put chains round the chassis.
Perhaps unnecessarily I braced the chassis at that point with 2x2 but it made
me feel happier.
Four bolts at the front of the drive shaft, brake rods disconnected, spring
shackles undone and out comes the whole lot backwards. Brilliant.
:clap