(Click for Larger Image)
Universal Vintage Tire
is pleased to announce a new line of High Quality Rims for the Model T.
Included are a 21" Split Rim and Clincher rims with Lugs or Plain.
(Click for Larger Image)
Gery Bergbower is manufacturing Model T radiators. He has attached a picture of 2 rads, a high and a low. These are all-copper, 5 round tube cores. They run $795.00 for the highs, $775.00 for the lows, plus shipping. He also builds a round tube copper and does re-coring on 28-29 A's,
(Click for Larger Image)
Dave Szumowski is manufacturing a new aluminum crankcase for speedsters. Contact him at:
(Click for Larger Image)
Fun Projects is manufacturing an inexpensive device to check the coils main windings.
(Click for Larger Image)
T-Parts is pleased to announce replacement emergency brake springs for the 1918 - 1927 TT Truck.
(Click for Larger Image)
"Strobo-Spark" Model T Ford Coil Tester
Hardened Brake QuadrantsAmerican made and hardened quadrant for parking brake. Super long teeth
life. Both four hole (early) and two hole(late) models.
Brake Quadrant
Nif-T's
Welded Stainless Steel Muffler with the Tailpipe, extending passed the rear axle, to keep the underside cleaner and lasting on and on
and on
Nif-T's
Keep
the soot/grease from all going to underside of your early beauty. This
deflector a stainless steel version of an original accessory will do the
trick.
Nif-T's
Filling
the gap left when the '17-'23 radiator aprons became no longer
available.
Nif-T's
Stainless
Steel Cooker and Bake...the manifold cooker with the lusterous shine and
easier cleanup for your outing taste treats
Nif-T's
On
touring cars with the top up one cannot see behind (T's are wider in
back.) Therefore, a telescoping mirror that slides out for inclement
weather . Mounts on windshield stanchion. Brackets for both early and late
windshields.
Nif-T's
T-Parts
is pleased to announce the availability of replacement parts for the
26-27 fuel sediment bowl.
Longer
band springs available. These are 2 1/4" long and should eliminate the
need for adding spacers and washers
Henline-t-parts
now has a stock of the Mezger Automatic Windshield Data Plates.These are made with black on brass and an exact replica of the data plate found on the Mezger Automatic Windshield.
J&M
Machine Company manufactures the reproduction drums.
(Click for Larger Image)
Fun Projects is manufacturing a dash shield for wooden firewalled T's.